Skip to content
WITH LIVE ACTORS

Meeting cost calculator What is this meeting really costing?

Work out in seconds what a meeting costs per session and per year. You see and adjust every assumption yourself.

Calculate meeting costs

Enter attendees, salary or hourly rate, duration and frequency. The result updates instantly.

The result is an estimate based on your assumptions. It shows working time in euros, not the value or benefit of a meeting.

Calculate cost per person from

Everyone in the meeting, including whoever runs it.

Full annual gross pay, including any 13th and 14th salary.

Default 1,720 (full time minus holidays, public holidays, sick days). Adjust for part-time.

Default 30 % as a rough assumption. If your hourly rate already covers all costs, set 0.

Planned or actual length of one meeting.

Every two weeks = 0.5; daily = 5.

Weeks in which the meeting takes place. Default 44.

Result

Cost per meeting

–

Per year
–
Per week
–
Per minute
–
Hourly cost per person incl. on-costs
–
Person-hours per year
–

Estimate based on your assumptions. Preparation and follow-up are not included.

Live timer: meeting in progress

Start the timer when the meeting begins. It counts up the cost using your inputs above.

Elapsed

0:00:00

Cost so far

–

Your answers stay on your device. Nothing is stored or sent.

How it works

  1. Enter the basics

    How many people attend, how long does the meeting last and how often does it take place each week?

  2. Set the hourly cost

    Choose annual salary or hourly rate. Employer on-costs and annual working hours are pre-filled and can be changed.

  3. Use the result

    Read off the cost per meeting and per year, copy the result or let the live timer run in your next meeting.

Calculate meeting costs: why it is worth a look

A meeting feels free because no invoice arrives. In reality it is one of the most expensive routines in office life: every hour that six people spend together at a table or on a video call is six hours of work. Calculating meeting costs makes this invisible figure tangible – not to talk meetings down, but to decide more consciously which ones are really needed and how to make them better.

The meeting cost calculator on this page needs only a few inputs: the number of attendees, an average gross annual salary or an hourly rate, the duration and how often the meeting happens each week. From these it works out the cost per meeting, per week and per year, plus the person-hours tied up. The live timer counts the cost while a meeting is running. Everything is calculated in your browser; nothing is stored or sent.

How the meeting cost calculator works

It starts with the hourly cost per person. If you enter an annual salary, the calculator divides it by the annual working hours and adds the employer’s on-costs. If you enter an hourly rate directly, the on-cost percentage is added too – if your rate already includes all costs, for example an internal charge-out rate, set the percentage to zero. Then: cost per meeting equals attendees times hourly rate times duration in hours. For the year, that is multiplied by meetings per week and working weeks.

An example with the default values: at a gross salary of 55,000 euros a year, 1,720 working hours and a 30 per cent uplift, one working hour costs around 41.60 euros. A one-hour meeting with eight people therefore costs about 333 euros. If it happens every week, that comes to just under 14,600 euros a year over 44 working weeks – and 352 person-hours, roughly nine full working weeks of one person.

The per-minute figure is especially telling. In the example, every minute of this meeting costs just over five euros. Five minutes of waiting until the tech works or everyone has arrived, plus ten minutes of repeating things for latecomers, quickly add up to an amount that would pay for a good team breakfast. Comparisons like this help a team talk about punctuality and preparation without making it personal.

The assumptions: salary, on-costs, working hours

A calculation is only as good as its assumptions. That is why every value in the calculator is visible and editable. The defaults are deliberately round starting points, not industry figures. For a robust number in your organisation, ask HR or finance for average staff costs.

  • Annual salary: the attendees’ average gross annual salary. In Austria the 13th and 14th salary payments are part of it, so enter the full annual gross rather than the monthly salary times twelve.
  • Employer on-costs: on top of gross pay, employers pay social security contributions and payroll levies. The default of 30 per cent is a rough assumption; the actual figure depends on salary level, country and contract.
  • Annual working hours: the default of 1,720 roughly assumes a 40-hour week minus holidays, public holidays and a few sick days. Adjust it for part-time or different weekly hours.
  • Working weeks: the weeks in which the meeting actually takes place. Holidays and public holidays are excluded; the default is 44.

What the calculator does not show

The figure is more of a lower limit. It includes neither preparation nor follow-up, neither the walk to the meeting room nor the time it takes until everyone is focused on their actual work again. People who constantly switch between meetings and tasks lose time every time they get back into a task. A meeting in the middle of the morning can therefore cost more than the time spent in the room.

On the other hand, the calculator does not show what a meeting achieves. An hour in which a team settles a difficult decision, resolves a conflict or kicks off a project properly can save many hours of misunderstandings and duplicated work. So the cost is not a verdict but a question: is the benefit of this meeting in proportion to what it ties up?

Making meetings shorter and better

Once you know what meetings cost, the levers are usually easy to spot. Back in the 1950s, the British historian C. Northcote Parkinson described the observation that work expands to fill the time available for it. For meetings this means a 60-minute slot fills up even when 30 minutes would have been enough. These questions help you tidy up the calendar:

  • Clarify the goal: what should be decided, clarified or agreed by the end? No goal, no meeting.
  • Invite fewer people: anyone who only needs to be informed gets short minutes instead of an invitation.
  • Plan shorter slots: 25 or 50 minutes instead of 30 or 60 create a buffer between meetings.
  • Send the agenda in advance and ask people to read documents beforehand instead of presenting them in the meeting.
  • Review recurring meetings regularly: does the weekly check-in still need to happen in this form?
  • Work asynchronously where possible: status updates and votes often work well in writing.

Using the live timer wisely

The live timer counts up the cost of a running meeting second by second, using the values you entered above. Started at the beginning of a meeting, it shows how quickly a quarter of an hour of digression adds up. That can wake a team up, but use it with tact: nobody should feel watched, and a good conversation is not a cost item to be cut short.

It works well to announce the timer openly, for example in a retrospective about your own meeting culture or in a recurring meeting that feels too long. Afterwards, ask together what you want to change. To see how healthy your meetings are overall, try our meeting culture check.

Time together that pays off

Not every hour together has to be a meeting. Sometimes a shared experience moves a team further than the tenth round of alignment. At Secret Mission in Vienna, colleagues solve a spy mission together with actors at real locations around the city – and see how they work together when it really counts.

Frequently asked questions

How do I calculate the cost of a meeting?

Multiply the number of attendees by their average hourly cost and the duration in hours. You get the hourly cost by dividing the annual salary by the annual working hours and adding employer on-costs. The calculator does this automatically.

What value should I use for employer on-costs?

The default of 30 per cent is a rough assumption. The actual uplift depends on the country, salary level and contract. For exact figures, ask HR or finance.

Why 1,720 working hours a year?

The value roughly assumes a 40-hour week minus holidays, public holidays and a few sick days. It is a default you can adjust for part-time or other working hours.

Should I include the 13th and 14th salary?

If they apply, yes. In Austria these extra payments are part of the annual salary, so enter the full gross annual salary rather than the monthly salary times twelve.

Can I use an hourly rate instead of a salary?

Yes. Choose “Hourly rate” at the top. If your rate already includes all costs, such as an internal charge-out rate, set the uplift to zero.

How does the live timer work?

From the moment you start it, it counts up the cost of the running meeting based on the attendees and hourly cost you entered. You can pause, resume and reset it.

Does the calculator show the real cost?

It shows an estimate of the working time tied up, in euros. Preparation, follow-up and time lost to interruptions are not included, and neither is the benefit of the meeting.

Are my inputs saved?

No. Everything is calculated in your browser. Nothing is stored and nothing is sent.

A mission instead of another meeting?

A company event with a real experience often moves teams further than any alignment round. With Secret Mission you play a spy story with actors at real locations in Vienna.

Discover company events in Vienna

Visual aids

Set up the page so it is easy for you to read. Your choice applies to every page and stays saved on this device.

Text size
Book nowGift cards
Book now
Tickets

Ticket shop

Loading dates …